Endress+Hauser Digital Recorder eco-graph c Betriebsanleitung Seite 97

Digital Recorder
Set-up, Digital input x, "Event + operation time" function
The following menu window only appears when using the digital input as an "Event +
operation time" function:
Fig. 19: Set-up, Digital input x, Event + operation time function
Combination of the "On/off event" and "Operational time" functions described above.
With this, you can also acquire the on-times and off-times as well as the cumulated run
time. For an exact description, see also "Operational time" and "On/off event".
Set-up, Digital input x, "Quantity from time" function
The following menu window only appears when using the digital input as a "Quantity
from time" function:
Fig. 20: Set-up, Digital input x, Quantity from time function
Calculation of the quantity, e.g. flow taking time into account.
Identifier: Name of measuring point (e.g. "quantity") or description of the function carried
out with this input.
Engineering unit: Technical unit of the input, e.g. litre, m
Decimal point: Number of places after decimal point for the display.
Input factor in: Defines whether the factor entered is respective to 1 second or 1 hour.
1 Second: Impulse factor = factor which provides the physical value when multiplied by
an input impulse.
Example: 1 second corresponds to 5 m -> Enter "5" here.
Operation / set-up
97