Endress+Hauser Digital Recorder eco-graph c Betriebsanleitung Seite 83

Digital Recorder
!
5.4 The main menu
5.4.1 The set-up window
Fig. 5: The set-up window
Note!
If individual sections are missing, your device is not equipped with this option.
The individual parameters are summarised in the main menu in section:
Basic settings Settings which are not channel-linked, i.e. date, time etc.
→ Chap. 5.7.1
Digital inputs Settings of the connected digital inputs (incl. limit settings).
→ Chap. 5.7.2
Digital combinations Settings only required if digital channels are to be mathematically combined
→ Chap. 5.7.3
with each other. Examples: summation of impulse counters, logical
combination of digital inputs, etc.
Relay → Chap. 5.7.4
Various relay settings (e.g. operating mode, identifier, etc.)
Build groups Combine digital signals and/or relay statuses in groups such that you can call
→ Chap. 5.7.5
up the important information in operation at the push of a button (e.g. pumps,
signals in system part 1, ...). Maximal 10 channels per group.
Signal analysis Settings to obtain signal analyses for configurable times/cycles as well as menu
→ Chap. 5.7.6
to reset signal analysis manually.
Miscellaneous Information on the interface used.
→ Chap. 5.7.7
Service Service functions.
→ Chap. 5.7.8
"
Changes must only be made by qualified skilled personnel. Inputting incorrect
information causes malfunctions!
Key functions for selecting/changing:
F
: Beginning of change, confirmation of selection
V W
or : Select parameters
U T
or : Move cursor - switch to next symbol
Z
: Cancel the last operating step -> return to previous screen
Input principle:
1. Begin changing parameters each time with
Caution!
F
.
Operation / set-up
83