Endress+Hauser Digital Recorder eco-graph c Betriebsanleitung Seite 85

Digital Recorder
5.7 List of operating parameters
5.7.1 Basic settings
Fig. 6: Set-up, Basic settings
Unit identifier Use this to describe, for example, where the device is installed (important if you
are using several devices). 20 characters.
!
Is also saved onto the diskette. In the PC, graphics/tables are provided with this
text (important, for example, if you have several devices in operation). The unit
identifier is also available when exporting the measured data, e.g. into a
spreadsheet program.
Actual date Format dependent on the operating language, see help in device (e.g.
DD.MM.YY)
Actual time Format: hh:mm, 24 h display
NT/ST changeover Activate summertime/normal time changeover.
"Automatic": changeover as per applicable rules of selected NT/ST region
"Manual": changeover times can be set in the next operating items
"Off": no time changeover
NT/ST region The times for changing from normal time to summertime and back vary region
automatic by region. Select the suitable region here. The changeover times are then
changeover shown in grey for your information.
Date NT->ST man. Day in spring on which the changeover from normal time to summertime takes
changeover place.
Time NT->ST man. Time at which the time is moved forward by 1 hour on the day of the changeover
changeover from normal time to summertime. Format: hh:mm
Date ST->NT man. Day in autumn on which the changeover from summertime to normal time takes
changeover place.
Time ST->NT man. Time at which the time is moved back by 1 hour on the day of the changeover
changeover from summertime to normal time. Format: hh:mm
Release code Ex works: "0000", i.e. device can be set at any time without release code.
Individual code set: device can only be set after entering this code.
Tip: Make a note of the code and store it somewhere where it is inaccessible
to unauthorised persons.
Save cycle Normal measured value save cycle: indicates how quickly the recording is
updated and thus stored.
Note!
Operation / set-up
85