Endress+Hauser Digital Recorder eco-graph c Betriebsanleitung Seite 104

Operation / set-up
104
Copy settings: Copies the settings of the current relay into the selected relay. Both of the last
positions of the target relay's designation are replaced with its number.
Tip:
Makes device setting easier, if the same settings apply largely for several
relays.
5.7.5 Build groups
Fig. 28: Set-up, Build groups
Only channels that are selected in groups are displayed and saved.
Combine digital signals and relays in groups such that you can call up the important
information in operation at the push of a button (e.g. temperatures, signals in system
part 1, ...). Maximum 10 channels can be allocated to a group. The following menu
window appears when a group is selected:
Fig. 29: Set-up, Group x
Identifier: Relevant identification of the signals allocated to this group, e.g. quantities,
system 1, boiler house...
Display x: Colour for displaying the allocated input.
Note: only the signals that are written/displayed in the groups are saved.
Digital Recorder