Endress+Hauser Digital Recorder eco-graph c Betriebsanleitung Seite 116

Commissioning
116
Using total screen Digital channels are displayed across the entire recording area. Impulse count
inputs and operation time counters are displayed as a digital value on the right.
An additional sign appears to the right of the channel identifier if limit values are
violated.
Fig. 42:
Digital display Current measured values are displayed as large digits. This has no effect on
the signal recording. The status label of the digital channels is inverted
(coloured background) as long as the associated input is activated, i.e.
"switched on" ("High active", i.e. activation with 12 to 30 VDC).
Fig. 43:
Overview All active channels and their functions appear on the overview screen. The box
beside the channel number indicates the function of the channel. These boxes
are highlighted in red if limit values are violated. In addition to digital inputs,
relays and digital combinations also appear on the overview screen.
Fig. 44:
Signal display using total "screen"
Signal display "Digital display"
Signal display "Overview"
Digital Recorder