Endress+Hauser Digital Recorder eco-graph c Betriebsanleitung Seite 107

Digital Recorder
5.7.8 Service
Displays and settings for service technicians in event of faults. Changes may only be
made by the service staff.
Fig. 32: Set-up, Service
Fig. 33: Set-up, Service, General
SW version: Device software version. Please state this code if you have questions about the
device.
DFlash type: Please state this code if you have questions about the device.
Last power on: Please state this code if you have questions about the device.
Last C-assertion: Please state this code if you have questions about the device.
"
PRESET:
Resets all parameters to the factory settings.
All previous values, settings and contents of the memory are deleted.
Display addresses: Displays the address of the current position, in addition to the help texts.
CPU number. Please state this code if you have questions about the device.
CPU number:
Unit running time: Displays the total operating time of the device. Please state this code if you
have questions about the device.
LCD running time: Displays the total operating time of the screen's rear illumination. Please state
this code if you have questions about the device.
Caution!
Operation / set-up
107