Werbung
Verfügbare Sprachen
Verfügbare Sprachen
@ PLAY button
Press to start playback, or together with the REC button to
start recording.
@ PAUSE/STILL button
Press to stop the tape temporarily during recording or
playback. To release the Record-Pause or Still mode, press
the PLAY button.
@ SEARCH/VAR button
SEARCH:
Press to set to ON for search operations using
the SEARCH/JOG dial. The tape plays back at
the speed set by the SEARCH dial as soon as
the SEARCH button is pressed.
VARIABLE (SHIFT+SEARCH):
Press together with the
SHIFT button to enter the Variable speed mode.
Using the SEARCH dial, playback speed can be
varied between —1 and +2 times normal speed.
See page 20.
@ SEARCH/JOG dial
This dial consists of two concentric controls; the outer
control functions as a shuttle search dial and the inner
control functions as a jog dial. Both are used to search for
the desired playback picture.
Recorder Control Section
@ REC button
Press together with the PLAY button @ to start recording.
When the REC
button
is pressed on its own
during
playback, the input signal can be monitored.
@ REW button
Press in the Stop mode to rewind the tape. When this
button is pressed during playback, the high-speed search
mode will be engaged.
@® FF button
Press in the Stop mode to fast forward the tape. When this
button is pressed during playback, the high-speed search
mode will be engaged.
@ STOP button
STOP:
Press to stop the tape and enter the Stop mode
(Standby
On
mode).
The
STOP
and
PAUSE/STILL indicators light. When controlled
through a 45-pin connector, the VTR enters the
Still mode.
STB OFF:
Press together with the SHIFT or PAUSE/STILL
(SHIFT +
button to enter the Standby Off mode. In the
STOF)
Standby Off mode, the indicator in the STOP
eron)
button will light. When controlled through a 45-
pin connector, the VTR enters the Stop mode.
_ © RUN EDIT button
Press while in the Play mode together with the PLAY button
to start manual editing.
@ PLAY button
Press to start playback, or together with the REC button to
start recording.
@ PAUSE/STILL button
Press to stop the tape temporarily during recording or
playback. To release the Record-Pause or Still mode, press
the PLAY button.
@ SEARCH/VAR button
SEARCH:
Press to set to ON for search operations using
the SEARCH/JOG dial. The tape plays back at
the speed set by the SEARCH dial as soon as
the SEARCH button is pressed.
VARIABLE
(SHIFT+SEARCH):
Press together with the
SHIFT button to enter the Variable speed mode.
Using the SEARCH dial, playback speed can be
varied between —1 and +2 times normal speed.
@ SEARCH/JOG dial
This dial is constructed as two concentric controls; the
outer contro! functions as a shuttle search dial and the
inner one functions as a jog dial. Both are used to search
for the desired playback picture.
The JOG dial is also used to correct edit points, set audio
edit-in points in audio-split editing, or to set GP] advance
timing.
Werbung
