Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Confirmation of Edit Points and Duration
<Confirming edit-in points>
@ To confirm the counter data of the edit-in point, press the IN
button for the player or the recorder as necessary. The
corresponding IN indicator will blink and the data will be
displayed for as long as the IN button is pressed.
@ The edit-in points for both the player and recorder can be
confirmed at the same time by pressing the Minus (—) button.
<Confirming edit-out points>
© To confirm the counter data of the edit-out point, press the
OUT button for the player or the recorder as necessary. The
corresponding OUT indicator will blink and the data will be
displayed for as long as the OUT button is pressed.
@ The edit-out points for both the player and recorder can be
confirmed at the same time by pressing the Plus (+) button.
<Confirming the duration of edits>
@ To confirm the duration of an edit, press the IN and OUT
buttons simultaneously. The IN and OUT indicators blink and
the duration of the edit is indicated.
® To confirm the durations of the edits for both the player and
the recorder, press the Minus (-) and Plus (+) buttons
simultaneously.
Access to Edit Points
<Accessing edit-in points>
@ The edit-in point can be accessed by pressing the IN button
while pressing the GOTO button.
e The edit-in points for both the player and recorder can be
accessed at the same time by pressing the Minus (—) and
GOTO buttons simultaneously.
<Accessing edit-out points>
e The edit-out point can be accessed by pressing the OUT
button while pressing the GOTO bution.
e The edit-out points for both the player and recorder can be
accessed at the same time by pressing the Plus (+) and
GOTO buttons simultaneously.
* If an edit-out point is specified at a point before the edit-
in point, the edit-in point is automatically cancelled. If
an edit-in point is specified at a point after the edit-out
point, the edit-out point is automatically cancelled.
* As the duration of the player's edit and that of the
recorder's edit are always equal, entering the edit-in
points for the player and recorder and the edit-out point
for either the player or recorder is sufficient; the other
edit-out point is determined automatically.
* Using the time counter memory, counter data can be
temporarily held in memory and then entered as an edit-
in or edit-out point. See page 37, "TIME COUNTER
MEMORY FUNCTION".
Rehearsal editing can be performed using the preview function. The edited sequence can be "rehearsed" to ensure the edit-in and
edit-out points are appropriate. In practice, however, this step can be omitted.
Out-Point Preview
@ Set both the player and recorder to the Still mode.
@ Press the PREVIEW button. Both the player and reccrder
start to run as they would in actual editing. The picture can
be monitored on the monitor connected to the recorder.
(The video and audio signals of the edit are monitored in the
E-E mode.)
mo
PRE VIEW
@ When
the PREVIEW
button is pressed during preview
editing, preview editing restarts from the beginning.
@ To view only the edit-out section, press the OUT
and
PREVIEW buttons simultaneously.
(This function is available only in cut editing.)
To Quit Preview
© To quit during preview editing, press the ALL STOP button.
The player and recorder enter the Still mode.
Werbung
