Werbung
Verfügbare Sprachen
Verfügbare Sprachen
@® Audio signal SPLIT button
To set the edit-in point of the audio signal independently of
the edit-in point of the video signal. The audio edit-in point
can be specified in frames relative to the video edit-in point
by turning the JOG dial for the recorder while the SPLIT
button is depressed. Edit-point data is entered by pressing
the SPLIT button together with the ENTRY button @.
CANCEL button
To clear entered data from memory (edit points, audio-split
edit points, GP! advance timing and counter data). Press
the IN/OUT buttons
@ @,the SPLIT button@®, the GPI
ADVANCE
button @, or DA buttons @ together with the
CANCEL button to clear the corresponding memory.
Minus (-)/Plus (+) buttons
By pressing either button while the IN or OUT button is
depressed, an entered edit point can be shifted frame by
frame in the corresponding direction. When either button is
pressed on its own, the IN or OUT indicators in the three
time counters blink and the edit-in or -out points of the three
VTRs are displayed. When the CANCEL button is pressed
while either button is depressed, the edit-in or.-out points of
the three VTRs are cleared from memory simultaneously.
Also, when the ENTRY button is pressed while either button
is depressed, the readings of the three time counters are
entered simultaneously as edit-in or -out points. When the
GOTO button is pressed while either button is depressed,
the edit-in or -out points of all the VTRs are accessed.
When the Minus (—) and Plus (+) buttons are pressed
simultaneously, the IN and OUT indicators in the three time
counters blink, and the durations between the edit-in and
edit-out points are displayed.
LAST ED button
Press to recall the edit point data of the previous edit.
When this button is pressed, the edit point data of the edit
executed
last is displayed on the time counter. When
pressed again, the edit point data of the current edit is
displayed.
@ This unit incorporates one memory to store the edit point
data of an edit. Pressing the LAST ED button alternates
the data in memory between the executed edit and the
current edit. When
an edit is executed, its data
is
automatically stored in memory.
@ The LAST ED button lets you use a single-event memory
like a dual-event memory.
REC EE button
Press to monitor the recorder's input signal on a TV monitor
connected to the recorder. See page 39.
IN/OUT buttons for players
When
either
button
is pressed
on
its own,
the
corresponding IN or OUT indicator blinks and the edit-in or -
out point is indicated on the time counter. When either
button and the ENTRY button are pressed simultaneously,
an edit-in or -out point is entered; when pressed together
with the CANCEL button, the edit-in or -out point is cleared.
Press the Minus (—) or Plus (+) button together with the IN
or OUT button to shift the entered edit-in or -out point frame
by frame in the corresponding direction.
When the IN and OUT buttons are pressed simultaneously,
the IN and OUT indicators in the corresponding time
counter blink, and the duration of the edit is displayed.
If
the GOTO
button is pressed with the IN or OUT button
depressed, the edit-in or -out point of the corresponding
VTR is accessed.
@
®
®
®
—i1n—
ENTRY button
To store edit points and time counter data in memory. When
this button is pressed together with the IN or OUT button,
an edit-in or edit-out point is entered. After selecting the
player using the A or B select button, press the ENTRY
button together with one of the DA buttons to store the
current time counter data in memory.
IN/OUT buttons for recorder
See @. In addition, the IN/OUT buttons for the recorder can
also be used with the JOG dial for the recorder, to shift edit
points, or to modify the duration of the edit. Turn the JOG
dial while pressing either the IN or OUT button, or while
pressing both the IN and OUT buttons, respectively.
PREVIEW button
To start rehearsal editing. If this button is pressed again
during rehearsal editing, rehearsal editing will start again
from the beginning.
AUTO EDIT button
After the edit points have been determined, press this
button to start actual editing. lf this button is pressed
during preview editing, actual editing will start. If pressed
again during actual editing, editing will start again from the
beginning.
GOTO button
Press together with the appropriate button(s) to access
specified tape positions.
REVIEW button
To review the executed edit.
GP! ADVANCE button
To set the GPI pulse output timing independenily of the
edit-in point. By turning the JOG dial for the recorder while
pressing this button, the GPI pulse output time can be set
in frames relative to the edit-in point. When this button is
pressed together with the SHIFT button, a "manual take"
pulse is output from the GPI port. During A/B roll editing, if
this button is pressed together with the SHIFT button
before the preset pulse output time has been reached, the
pulse will be output immediately and
not be at the preset
time.
SHIFT button
Pressing this button together with an operation button
activates the function indicated on the front of the button.
ALL STOP button
Press this button to stop all the VTRs. The VTRs controlled
by 9-pin remote control signals will enter the Stop mode and
those controlled by 45-pin remote control signals will enter
the Still mode.
Werbung
