JVC RM-G860E Bedienungsanleitung Seite 27

EXECUTION OF ANEDIT
@ Set the player and recorder to the Still mode. To stop editing before the entered edit-out point is
_ @ Press the AUTO EDIT button. reached:
Actual editing is started by the same procedure as preview
editing. Editing stops automatically at the edit-out point. @ Press the ALL STOP button.
When editing is finished, the recorder plays back for the
postroll time (1 sec), then rewinds automatically to the edit-
out point and enters the Still mode. Editing will restart if the
AUTO EDIT button is pressed while editing is in progress.
NOTE:
© If the number of retries is too many, set system setting
panel DIP switch SW1-1 to ON.
This procedure can be omitted if unnecessary.
@ Press the REVIEW button.
The recorder rewinds the tape past the edit-in point, then
starts playback. After it has passed the edit-out point, it
enters the Still mode.
* The Review mode is released automatically 5 seconds
after the edit-out point.
To release the Review mode before the edit-out
point:
@ Press the ALL STOP button. The recorder enters the Still
mode.
ALL STOP
Both the player and recorder enter the Still mode.
ALL STOP
\