JVC RM-G860E Bedienungsanleitung Seite 23

_ _ ENTRY OF EDIT POINTS
In assemble editing, enter the player's edit-in and -out points and the recorder's edit-in point. In insert editing, enter the edit-in
points for the player and recorder and the edit-out point for either the player or the recorder. The other edit-out point is determined
automatically.
Entering Player's Edit Points
Select player A or B with the A or B button.
Locate the edit-in point, and engage the Still mode.
Press the ENTRY button while pressing the IN button for
the player. The IN indicator in the time counter lights and
the OUT indicator blinks.
@ Locate the edit-out point, and engage the Still mode.
@ Press the ENTRY button while pressing the OUT button for
the player. The OUT indicator in the time counter lights.
Entering Recorder's Edit Points
© Locate the edit-in point, and engage the Still mode.
@ Press the ENTRY button while pressing the IN button for
the recorder. The IN indicator in the time counter lights and
the OUT indicator blinks.
NOTE:
In 9-pin timecode-referenced editing, the last dot on the
player's counter display lights if the colour frames at the
recorder's and player's edit-in points do not match. To find out
. how many frames must be shifted for the colour frames to
match, press the player IN button. The other player's display
shows the colour frame shift in frames while the IN button is
. being pressed. Correct either the player's or recorder's edit-in
point so that the indicated number of frames is "00". For
correcting edit points, see page 25.
DIEED 6655 SSEo
Gee ee Ee IEE
[enesan
6X3]
© Locate the edit-out point, and engage the Still mode.
© Press the ENTRY button while pressing the OUT button for
the recorder. The OUT indicator in the time counter lights.
The player's edit-out point (if entered before) will be
cancelled.
* If the edit-in points for the player and recorder, and the
edit-out point for the player have been entered, there is
no need to enter the recorder's edit-out point.
* Edit points can be entered while in the Play mode or in
the Search mode.
Simultaneous Entry of Edit Points for Player and
Recorder
A single operation lets you enter the edit points for both the
player and recorder.
@ To enter the edit-in points for both player and recorder at
the same time, press the Minus (—) and ENTRY buttons
simultaneously. The IN indicators in the time counters will
light.
@ To enter the edit-out points for both player and recorder,
press the Plus (+) and ENTRY buttons simultaneously. The
OUT indicators in the time counters will light. If fre edit-in
points of player and recorder have already been entered,
the edit-out point will be entered only for the player and the
OUT indicator in the player's time counter will ligh.