JVC RM-G860E Bedienungsanleitung Seite 21

Use the SEARCH button, SEARCH + SHIFT buttons, and JOG/SEARCH dials.
Shuttle Search
- Turn the SEARCH dial (the outer dial). Continuous search is
available in both directions, at a speed corresponding to the
degree the dial is turned. Use to roughly locate edit points.
e@ When the dial is set to the center position (STILL), a still
picture can be obtained.
e To run the tape in the forward direction, turn the dial in the
FWD direction (clockwise); to run the tape in the reverse
direction, turn the dial in the REV direction (counter-
clockwise).
e@ When the SEARCH button is pressed, playback will resume
at the speed already set by the SEARCH dial.
@ When the dial is set to the x1 or x-1 click position, search will
be at normal speed. When the SEARCH dial is set to the x1
click position, the internal sync mode _ is entered
automatically.
* After setting the POWER switch to ON, pressing the
SEARCH button may not engage the Search mode. In
this case, turn the SEARCH dial fully in both directions
to restore normal conditions.
To cancel the Search mode, press either PLAY,
PAUSE/STILL, FF, REW, STOP, or ALL STOP.
Auto Tracking (AT) Piayback
When using a VTR with an Auto Tracking (AT) function,
playback speed can be controlled in the Variable mode.
e Press the SHIFT and SEARCH buttons simultaneously to
enter the Variable mode. Playback speed can be varied
between —1 and +2 times normal speed. Available speeds
are (in percentage) 0, +/-3, +/-10, +/-20, +/-30, +/—40,
+/-50, +/-70, +/-100, +150, and +200.
Time counter
ow) ~~, - -_, —,
ee, ~,
( ya
yet ie a]
'nad
(
-_—e "ae yt
2 times normal speed
Indicated in percentage
The playback speed range is different with different
VTRs.
To cancel the AT mode, press FF, REW, STOP,
SEARCH, or A or B select button.
Jog Search
Turn the JOG dial (the inner dial). The tape can be played back
in either direction corresponding to the speed with which the
dial is turned. Use to locate edit points accurately.
@ To run the tape in the forward direction, turn the dial in the
FWD direction (clockwise); to run the tape in the reverse
direction, turn the dial in the REV direction (counter-
clockwise).
~20-