JVC RM-G860E Bedienungsanleitung Seite 39

GPI PULSE OUTPUT TIMING AND MANUAL TAKE
Setting GPI Output Timing
In A/B roll editing, the GP! pulse can be output before or after
the edit-in point.
@ Turn the JOG dial for the recorder while pressing the GP!
ADVANCE button to set the GPI pulse output point with
respect to the edit-in point.
Counter Display
Left time counter Middle time counter Right time counter
(for player A) (for player B) (for recorder)
"oF x a6
Advanced | - i i Pad "bh. th
om «let ae a7 tS
Delayed 37 ome 3 eee
Shifting GPI-2 Output Timing Relative To GPI-1
It is also possible to advance or delay the GPI-2 pulse output
(for audio mixer) relative to the GPI-1 pulse output (for video
switcher).
@ Turn the recorder JOG dial while pressing the GPI
ADVANCE and DA-1 buttons simultaneously to set the GPI-
2 pulse output point with respect to the GPI-1 pulse output
point.
me. Oe ee ~ #3
Advanced iw) a , nt og c£. t cc
ag i rn oe 30%
Delayed FP - GP 4 Cou
an
Manual Take Pulse Output
@ Press the GP! ADVANCE button together with the SHIFT
button to output the manual take signal. If the manual take
signal is output before the A/B switching point, the GPI
pulse is not output at the A/B switching point.
GP! pulse output point Edit-out point
| (2 : Delayed |
«: Advanced
Edit-in point
Recorder