JVC RM-G860E Bedienungsanleitung Seite 33

@ Set player A, player B, and recorder to the Still mode.
@ Press the AUTO EDIT button.
Actual editing is started by the same procedure as preview
editing. Editing stops automatically at the edit-out point.
When editing is finished, the recorder plays back for the
postroll time (1 sec), then rewinds automatically to the edit-
out point and enters the Still mode. Editing will restart if the
AUTO EDIT button is pressed while editing is in progress.
To stop editing before the entered edit-out point is
reached:
© Press the ALL STOP button.
All three VTRs enter the Still mode.
ALL STOP
"REVEW
To release the Review mode before the edit-out
point:
@ Press the ALL STOP button. The recorder enters the Still
This procedure can be omitted if unnecessary.
@ Press the REVIEW button.
El
The recorder rewinds the tape past the edit-in point, then
starts playback. After it has passed the edit-out point, it
enters the Still mode.
* The Review mode is released automatically 5 seconds
after the edit-out point.
mode.