Herunterladen Diese Seite drucken

JVC RM-G860E Bedienungsanleitung Seite 40

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

REC EE FUNCTION
when using a single monitor in editing.
Press the REC EE button. The button's indicator will light and
the monitor connected to the recorder will display the input
signal from the player.
oO
REC EE
* With DIP switch SW1-3 (located on the system setting
- panel) set to "ON", the REC EE mode is automatically
entered when the player is operated, and automatically
cancelled when the recorder is operated. This function
is especially useful in single-monitor editing.
To cancel the REC EE mode, press the REC EE button again.
Pressing the AUTO EDIT or PREVIEW button cancels the REC
EE mode automatically and engages the selected mode.
| |
AUTO EDIT
Ke
NOTE:
When the REC EE button is ON, the time counter may be
unstable
and continue
counting when
the player or
recorder enters the Still mode in VITC-referenced editing
using the BR-S611E/811E with the SA-F911E Interface
Unit (optional). This has no effect on actual editing.
SIMULTANEOUS
CONTROL OF TWO PLAYERS
Players A and B can be operated simultaneously.
Use this function to locate edit points in A/B roll editing.
Press the B button together with the SHIFT button. Both the A
and B buttons light and both player indicators in the time
counters will light. (BOTH mode)
INFORMATION
ON THE COUNTER
DISPLAY
ERROR MESSAGES
Display
Status
'
i)
This display warns that the corresponding VTR's REMOTE/LOCAL select switch
Lee
ce
is set to LOCAL. Appears when any of the tape control buttons is pressed.(Not
es
displayed with some VTRs.)
5%
Available only with 9-pin VTRs, this display warns that
no tape is loaded.
=
(bike
é
ve
m
'arc
Appears when any of the tape contro! buttons is pressed. (Not displayed with
some VTRs.)
With 9-pin VTRs, this display warns that power is not supplied to the VTR. With
45-pin VTRs, it warns that power is not supplied or no tape is loaded.
This display shows that the corresponding player cannot be operated since the
recorder is in the AUX mode.
ET
ug
Displayed when the PREVIEW
or AUTO
EDIT button is pressed, this display
warns that power is not supplied to the VTR.
a
~39-

Werbung

loading