JVC RM-G860E Bedienungsanleitung Seite 34

AUDIO SPLIT EDITING
Audio split editing is a type of insert editing in which the edit-in point for the audio signal is entered independently of that for the
video signal. Edit-in points for the AUD-1 and AUD-2 signals cannot be entered independently.
iN OUT SERVO
=LLLULL
EDITING CONTROL UNIT AM-G&60E
'our servo CS]
SEC FRAME
= 88ae8e8s
@ Press the INSERT buttons (VIDEO, AUD-1, AUD-2, TC)
corresponding to the signals to be inserted. To insert time
code signals, press the SHIFT and TC buttons
simultaneously.
@ Enter the edit-in points for both the player and the
recorder. These edit-in points serve as the video edit-in
points.
@a (While monitoring the sound and picture)
Determine the audio edit-in point for the recorder, and
engage the Still mode. Press the SPLIT and ENTRY
buttons simultaneously.
@b (For setting in time)
Turn the JOG dial while pressing the SPLIT button;
clockwise to set the audio edit-in point ahead of the video
edit-in point, and counterclockwise to delay the audio edit-
in point with respect to the video edit-in point.
Counter Display
Left time counter Middle time counter Right time counter
(for player A) (for player B) (for recorder)
mo - fo
Advanced mie im ("£
Ct en a on
Delayed
(FR
in
When the edit-in point for the audio signal is entered, the
corresponding SPLIT indicator lights.
dO
© Enter the edit-out point for either the player or recorder.
(Both video and audio signals have the same edit-out
point.)
© Press the AUTO EDIT button.
Video edit-in point
Audio edit-in point
oe Delayed
«+: Advanced
Edit-out point
ud
Video signal
Recorder
Audio signal
@ To cancel the Split Edit mode, press the SPLIT and
CANCEL buttons simultaneously.
* The Split Edit mode is entered even when one SPLIT
indicator is lit.
NOTE:
® Audio split editing cannot be applied in AT editing.
~33-