Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REAR PANEL
AC IN connector
Connect to a 220 — 240 V AC, 50/60 Hz outlet.
FUSE holder
9-pin remote connector for player A
45-pin remote connector for player A
9-pin remote connector for player B
45-pin remote connector for player B
9-pin remote connector for recorder
45-pin remote connector for recorder
Connect the recorder and players A and B with optional 45-
pin cable or 9-pin cables.
GPI-1/GPi-2 connection ports.
Output pulses to start video switcher and audio mixer
effects. See page 15.
DIP switches for additional functions
Prior to shipment, all switches are set to OFF (down).
SWs3-1
@ OG G9666908
6
Function
Selects between CTL and FG signals as the recorder's
time counting reference.
SW3-1
CTL signal
OFF
(Set to ON when using the
FG signal
ON
the PR-900E.)
Selects between CTL and FG signals as player A's time
counting reference.
SW3-2
SW3-2
CTL signal
OFF
(Keep set to OFF.)
FG signal
ON
Selects between CTL and FG signals as player B's time
counting reference.
Sw3-3
SW3-3
CTL signal
OFF
(Keep set to OFF.)
FG signal
ON
SW3-4 | Not used. Keep set to OFF.
SW3-5 | Set to ON when using the KR-M800E as the recorder
SW3-6 | Set to ON when using the PR-900E as the recorder
SW3-7 | Set to ON when using the KR-M800E/PR-900E/PR-600E
as player A.
SW3-8 | Set to ON when using the KR-M800E/PR-900E/PR-600E
as player B.
09
cnet
mana
i |
(VloleloTayuyaTarnya)
| Gaeta irmen
[oeersiachirer)|
PLA
a
ee se
Tt
DA
fee
5 ,
'emt
—Opi(eobo
kG
EON
SSE
'
Hol
"
aL
(Eon '
WY ninininininininioin
Function
Selects
video
circuitry
according
to
connected
equipment.
SW4-1
With KM-D600E, KM-3000E
OFF
With SA-W700E
ON
To select the postroll time (playback time after the edit-out
point in preview and review).
SW4-2
5 sec
OFF
1 sec
ON
Selects between 4-field and 8-field colour framing modes
when system setting panel DIP switch SW2-5 is set to
OFF.
SW4-3
4-field mode
OFF
8-field mode
ON
Selects
audio
circuitry
according
to
connected
equipment.
SW4-4
With all equipment except SA-W700E
OFF
With SA-W700E
ON
To select edit-in timing in 45-pin editing. It is preset to
~2 frames.
SW45
SW46
SW4-7
~1 frame
ON
OFF
OFF
-2 frames
OFF
OFF
OFF
(for BR-S811E/BR-S810E)
-3 frames
OFF
.ON
OFF
(for KR-M800E/KR-M820E/PR-900E)
—4 frames
ON
ON
OFF
—5 frames
OFF
OFF
ON
(for KR-M840E with SA-K22E}
-6 frames
ON
OFF
ON
-7 frames
OFF
ON
ON
-8 frames
ON
ON
ON
Selects the time tracking function. (With the time tracking
function ON, if the recorder's
IN point auternatically
registered at the OUT point of the previous editis shifted,
the player's IN point is also shifted accordingly.)
SW4-8
Time tracking function OFF
OFF
Time tracking function ON
ON
NOTE:
e@ SW3-5/6/7/8 must be set to OFF when not using the KR-
M800E/PR-900E/PR-600E.
@ SYNC IN connector
Accepts
a reference
signal
for synchronization.
A
composite sync signal or a composite video sigral can be
input as the reference signal.
-12~-
Werbung
