Inhaltsverzeichnis
Werbung
Achsen, Koordinatensyst., Frames, Reset–Verhalten (K2)
6.1 Achsen
Maschinendaten
AXCONF_GEOAX_NAME_T AB[0] = X
AXCONF_GEOAX_NAME_T AB[1] = Y
AXCONF_GEOAX_NAME_T AB[2] = Z
AXCONF_CHANAX_NAME_T AB[0] = X
AXCONF_CHANAX_NAME_T AB[1] = Y
AXCONF_CHANAX_NAME_T AB[2] = Z
AXCONF_CHANAX_NAME_T AB[3] = B
AXCONF_CHANAX_NAME_T AB[4] = WZM
AXCONF_CHANAX_NAME_T AB[5] = S1
SPIND_ASSIGN_TO_MACHAX[AX1] = 0
SPIND_ASSIGN_TO_MACHAX[AX2] = 0
SPIND_ASSIGN_TO_MACHAX[AX3] = 0
SPIND_ASSIGN_TO_MACHAX[AX4] = 0
SPIND_ASSIGN_TO_MACHAX[AX5] = 0
SPIND_ASSIGN_TO_MACHAX[AX6] = 1
MD 30300: IS_ROT_AX[3] = 1
MD 30300: IS_ROT_AX[4] = 1
MD 30300: IS_ROT_AX[5] = 1
MD 30310: ROT_IS_MODULO[3] = 1
MD 30310: ROT_IS_MODULO[4] = 1
MD 30310: ROT_IS_MODULO[5] = 1
MD 30320: DISPLAY_IS_MODULO[3] = 1
MD 30320: DISPLAY_IS_MODULO[4] = 1
MD 20090: SPIND_DEF_MASTER_SPIND = 1
MD–Nr
MD 10000: AXCONF_MACHAX_NAME_TAB[n]
MD 20050: AXCONF_GEOAX_ASSIGN_TAB[n]
MD 20060: AXCONF_GEOAX_NAME_TAB[n]
MD 20070: AXCONF_MACHAX_USED[n]
MD 20080: AXCONF_CHANAX_NAME_TAB[n]
MD 35000: SPIND_ASSIGN_TO_MACHAX[n]
1/K2/6-106
SINUMERIK 840D/840Di/810D Funktionsb. Grundmaschine (FB1) – Ausgabe 11.2003
AXCONF_GEOAX_ASSIGN_TAB[0] = 1
AXCONF_GEOAX_ASSIGN_TAB[1] = 2
AXCONF_GEOAX_ASSIGN_TAB[2] =3
AXCONF_MACHAX_USED[0] = 1
AXCONF_MACHAX_USED[1] = 2
AXCONF_MACHAX_USED[2] = 3
AXCONF_MACHAX_USED[3] = 4
AXCONF_MACHAX_USED[4] = 5
AXCONF_MACHAX_USED[5] = 6
AXCONF_MACHAX_NAME_T AB[0] = X1
AXCONF_MACHAX_NAME_T AB[1] = Y1
AXCONF_MACHAX_NAME_T AB[2] = Z1
AXCONF_MACHAX_NAME_T AB[3] = B1
AXCONF_MACHAX_NAME_T AB[4] = W1
AXCONF_MACHAX_NAME_T AB[5] = C1
Siemens AG 2003 All Rights Reserved
10.00
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
