Rohde & Schwarz R&S FSQ Bedienhandbuch Seite 787

R&S FSQ
Unterschiede im GPIB-Verhalten zwischen der R&S FSP- und R&S FSE-Gerätefamilie
Gerät Befehl (Sheet 30 of 50)
FSE MMEMory:SELect[:ITEM]:LINes[:ACTive]
FSE MMEMory:SELect[:ITEM]:MACRos
R&S FSE MMEMory:SELect[:ITEM]:NONE
FSQ
R&S FSE MMEMory:SELect[:ITEM]:SCData
FSQ
R&S MMEMory:SELect[:ITEM]:TRACe[:ACTive]
FSQ
FSE MMEMory:SELect[:ITEM]:TRACe<1...4>
FSE MMEMory:SELect[:ITEM]:TRANsducer:ALL
FSE MMEMory:SELect[:ITEM]:TRANsducer[:ACTive]
R&S FSE MMEMory:STORe:STATe
FSQ
R&S FSE MMEMory:STORe:TRACe
FSQ
FSE OUTPut:AF:SENSitivity
FSE OUTPut:UPORt<1|2>:STATe
FSE OUTPut:UPORt<1|2>[:VALue]
R&S FSE OUTPut<1|2>[:STATe]
FSQ
FSE READ:BURSt:FERRor:AVERage?
FSE READ:BURSt:FERRor:MAXimum?
FSE READ:BURSt:FERRor:STATus?
FSE READ:BURSt:PERRor:PEAK:AVERage?
FSE READ:BURSt:PERRor:PEAK:MAXimum?
FSE READ:BURSt:PERRor:PEAK:STATus?
6.342
Fernsteuerung – Beschreibung der Befehle
Parameter Hinweise
ON | OFF not available for
R&S FSQ (default
setting on the R&S FSQ)
ON | OFF not available for
R&S FSQ
ON | OFF
ON | OFF no numeric suffixes
behind TRACe
ON | OFF numeric suffixes behind
TRACe
ON | OFF not available for
R&S FSQ
ON | OFF not available for
R&S FSQ
1,path
1 to 3,path
<numeric_value> not available for
R&S FSQ and
R&S FSET
ON | OFF not available for
R&S FSQ
#B00000000 to not available for
#B11111111 R&S FSQ
ON | OFF
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
Operating Manual 1313.9681.11 - 02