Rohde & Schwarz R&S FSQ Bedienhandbuch Seite 780

R&S FSQ
Unterschiede im GPIB-Verhalten zwischen der R&S FSP- und R&S FSE-Gerätefamilie
Gerät Befehl (Sheet 23 of 50)
FSET DISPlay[:WINDow<1|2>]:TRACe<1...4>:Y[:
ESIB SCALe]:BOTTom
R&S FSE DISPlay[:WINDow<1|2>]:TRACe<1...3>:Y[:
FSQ SCALe]:MODE
FSE DISPlay[:WINDow<1|2>]:TRACe<1...4>:Y[:
SCALe]:PDIVision
R&S FSE DISPlay[:WINDow<1|2>]:TRACe<1...3>:Y[:
FSQ SCALe]:RLEVel
R&S FSE DISPlay[:WINDow<1|2>]:TRACe<1...3>:Y[:
FSQ SCALe]:RLEVel:OFFset
R&S FSE DISPlay[:WINDow<1|2>]:TRACe<1...3>:Y[:
FSQ SCALe]:RPOSition
R&S FSE DISPlay[:WINDow<1|2>]:TRACe<1...3>:Y[:
FSQ SCALe]:RVALue
FSE DISPlay[:WINDow<1|2>]:TRACe<1...4>:Y[:
SCALe]:RVALue:AUTO
FSET DISPlay[:WINDow<1|2>]:TRACe<1...4>:Y[:
ESIB SCALe]:TOP
R&S DISPlay[:WINDow<1|2>]:TRACe<1...3>[:STATe]
FSQ
FSE FETCh:BURSt:FERRor:AVERage?
FSE FETCh:BURSt:FERRor:MAXimum?
FSE FETCh:BURSt:FERRor:STATus?
FSE FETCh:BURSt:PERRor:PEAK:AVERage?
FSE FETCh:BURSt:PERRor:PEAK:MAXimum?
FSE FETCh:BURSt:PERRor:PEAK:STATus?
Operating Manual 1313.9681.11 - 02
Fernsteuerung – Beschreibung der Befehle
Parameter Hinweise
<numeric value> not available for
R&S FSQ
ABSolute | RELative R&S FSQ:
TRACe<1...3>
R&S FSE:
TRACE<1...4>
not available for
R&S FSQ
-130dBm to 30dBm R&S FSQ:
TRACe<1...3>
R&S FSE:
TRACE<1...4>
-200dB to 200dB R&S FSQ:
TRACe<1...3>
R&S FSE:
TRACE<1...4>
0 to 100 PCT R&S FSQ:
TRACe<1...3>
R&S FSE:
TRACE<1...4>
<numeric value> R&S FSQ:
TRACe<1...3>
R&S FSE:
TRACE<1...4>
ON | OFF not available for
R&S FSQ
<numeric value> not available for
R&S FSQ
ON | OFF R&S FSQ:
TRACe<1...3>
R&S FSE:
TRACE<1...4>
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
6.335