Inhaltsverzeichnis
Werbung
R&S ESU
REM ************************************************************************
Public Sub FrequencyList()
result$ = Space$(500)
'--------- Grundeinstellung R&S ESU ---------------------------------------
CALL SetupStatusReg
status = viWrite(analyzer, "*RST", 4, retCnt)
status = viWrite(analyzer, "INST:SEL SAN", 12, retCnt)
wechseln
status = viWrite(analyzer, "INIT:CONT OFF", 13, retCnt)
status = viWrite(analyzer, "SYST:DISP:UPD OFF", 17, retCnt)
'-------- R&S ESU für Leistungsmessung mit Frequenzliste konfigurieren -
status = viWrite(analyzer, "TRIG:LEV:VID 45PCT", 18, retCnt)
status = viWrite(analyzer, "LIST:POWer:SET ON,ON,OFF,VID,POS,100us,0", 40,
retCnt)
'-------- Perform measurement and query results ---------------------------
cmd$ = "LIST:POWer? "
cmd$ = cmd$ + "935.2MHZ,10dBm,20dB,OFF,NORM,1MHz,3MHz,300us,0,"
cmd$ = cmd$ + "1805.2MHZ,10dBm,20dB,OFF,NORM,1MHz,3MHz,300us,0,"
cmd$ = cmd$ + "1870.4MHZ,10dBm,20dB,OFF,NORM,1MHz,3MHz,300us,0,"
cmd$ = cmd$ + "2805.6MHZ,0dBm,20dB,OFF,NORM,1MHz,3MHz,300us,0,"
cmd$ = cmd$ + "3610.4MHz,10dBm,20dB,OFF,NORM,1MHz,3MHz,300us,0,"
cmd$ = cmd$ + "3740.8MHz,0dBm,20dB,OFF,NORM,1MHz,3MHz,300us,0,"
cmd$ = cmd$ + "5815.6MHz,0dBm,20dB,OFF,NORM,1MHz,3MHz,300us,0"
status = viWrite(analyzer, cmd$, 343, retCnt)
status = viRead(analyzer, result$, 100, retCnt)
Print result$
END SUB REM
************************************************************************
1302.6163.11
Komplexere Programmbeispiele
'Statusregister konfigurieren
'Single Sweep Betrieb
7.29
'Gerät zurücksetzen
'In Analysatorbetrieb
'Bildschirmdarstellung aus
'Schwelle fuer Videotrigger
D-2
Werbung
Kapitel
Inhaltsverzeichnis
