Rohde & Schwarz R&S ESU8 Bedienungsanleitung Seite 819

R&S R&S ESU
Gerät Befehl (Sheet 14 of 50)
R&S FSE CALCulate<1|2>:MARKer<1...4>:X
ESU
R&S CALCulate<1|2>:MARKer<1...4>:X:SLIMits:LEFT
ESU
R&S CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHt
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:
ESU STATe]
R&S FSE CALCulate<1|2>:MARKer<1...4>:Y?
ESU
R&S CALCulate<1|2>:MARKer<1...4>:Y:PERCent
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>[:STATe]
ESU
R&S CALCulate<1|2>:MATH:MODE
ESU
FSE CALCulate<1|2>:MATH<1...4>:MODE
R&S CALCulate<1|2>:MATH:POS
ESU
R&S FSE CALCulate<1|2>:MATH:STATe
ESU
R&S FSE CALCulate<1|2>:MATH[:EXPRession][:DEFine]
ESU
FSE CALCulate<1|2>:RLINe
FSE CALCulate<1|2>:RLINe:STATe
1302.6163.11
Unterschiede im GPIB-Verhalten
Parameter
0 to MAX
(frequency|sweep time)
0 to MAX
(frequency|sweep time)
0 to MAX
(frequency|sweep time)
ON | OFF
<numeric_value>
ON | OFF
LINear | LOGarithmic
LINear | LOGarithmic
-100PCT to 200PCT
ON | OFF
<expr>
MIN to MAX
ON | OFF
6.311
Hinweise
additional unit SYM is
available for R&S FSE
new function for
R&S ESU. Replaces
DISP:FLIN and DISP:
TLIN commands of the
R&S FSE
new function for
R&S ESU. Replaces
DISP:FLIN and DISP:
TLIN commands of the
R&S FSE
new function for
R&S ESU
affects all traces on the
R&S ESU; therefore the
numeric suffix :
MATH<1...4> is not
allowed for the
R&S ESU
for R&S FSE, only the
trace indicated by a
numeric suffix is affected
new function for
R&S ESU; replacement
for CALC:RLINe of the
R&S FSE
for R&S ESU, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH
for R&S ESU, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH and
<expr> may only consist
of (TRACE1-TRACE2)
or (TRACE1-TRACE3)
not available for
R&S ESU (replaced by
CALC:MATH:POS)
not available for
R&S ESU (replaced by
CALC:MATH:POS)
D-2