Rohde & Schwarz R&S ESU8 Bedienungsanleitung Seite 842

Unterschiede im GPIB-Verhalten
Gerät Befehl (Sheet 37 of 50)
FSE [SENSe<1|2>:]DDEMod:SEARch:SYNC:STATe
FSE [SENSe<1|2>:]DDEMod:SEARch:TIME
FSE [SENSe<1|2>:]DDEMod:SRATe
FSIQ [SENSe<1|2>:]DDEMod:SRATe
[SENSe<1|2>:]DDEMod:TIME
FSET [SENSe<1|2>:]DEMod
ESIB [SENSe<1|2>:]DEMod
FSET [SENSe<1|2>:]DEMod:FILTer:HPASs:FREQuency
FSET [SENSe<1|2>:]DEMod:FILTer[:LPASs]:AUTO
FSET [SENSe<1|2>:]DEMod:FILTer[:LPASs]:
FREQuency
FSE [SENSe<1|2>:]DETector<1...4>:CMEM[:STATe]
R&S [SENSe<1|2>:]DETector<1...3>[:FUNCtion]
ESU
ESIB [SENSe<1|2>:]DETector<1..4>[:FUNCtion]
R&S FSE [SENSe<1|2>:]DETector<1...3>[:FUNCtion]:AUTO
ESU
FSET [SENSe<1|2>:]DETector<1...4>:PSTRetch:AUTO
FSET [SENSe<1|2>:]DETecto<1...4>r:PSTRetch[:
STATe]
ESIB [SENSe<1|2>:]DETector<1...4>:RECeiver[:
FUNCtion]
FSET [SENSe<1|2>:]DETector<1...4>:RECeiver[:
FUNCtion]
FSE [SENSe<1|2>:]FILTer:CCITt[:STATe]
1302.6163.11
Parameter
ON | OFF
100 to 1600
160 Hz to 1,6 MHz
160 Hz to 7 MHz
1 to Frame Length
OFF | AM | AMVideo |
FM | PM
OFF | AM | FM
0 Hz | 10 Hz | 100 Hz | 1
kHZ
ON | OFF
<numeric_value>
ON | OFF
APEak |NEGative |
POSitive | SAMPle |
RMS | AVERage |
QPEak
APEak |NEGative |
POSitive | SAMPle |
RMS | AVERage |
QPEak
ON | OFF
ON | OFF
ON | OFF
POSitive |NEGative|
RMS | AVERage |
QPEak
POSitive | NEGative |
RMS | AVERage
ON | OFF
6.334
R&S R&S ESU
Hinweise
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
R&S ESU: number of
traces restricted to 3;
detector settings
correspond to selected
screen
R&S FSE: Qpeak not
available
number of traces
restricted to 3
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU and
R&S FSET
D-2