Werbung
Camera
Lighting
12VDC
Distance required for adjusting illumination in-
tensity of the pattern surface at approximately
2,500 tux (230 fc): about 1.3 m (4 ft.)
Pattern
(2)
(3)
ly overlap the black mask portion.
manual. (Some items only need to be checked.)
Warming up the camera
any adjustments.
Lighting
@ Adjust the distance between the light and the sub-
ject so that the illumination on the subject is about
2,500 lux.
@ Make the illumination over the entire subject sur-
face as uniform as possible.
~~
VIDEO
Terminated with 75.2
VIDEO
wave check
terminal
12VDC
ce)
ce)
Oo
AC adaptor
EXT. TRIG
Color monitor TV
(4) Connection
(5)
terminals
of
trigger
to
external
oscilloscope
The
following
trigger signals
must
be monitored
separately:
@ Horizontal trigger signal
(blue wire) or [.H5_] (red wire) connector of
the VIDEO PROCESS BOARD.
@ Vertical trigger signal
((H2]
(orange wire) or [_H1_] (yellow wire) con-
nector of the VIDEO PROCESS
BOARD.
Caution ''Hight Voltage''
Some parts of this camera, carry high voltages, such
as the high voltage transformer,
high voltage module
and EVF, exercise extreme care during adjustment.
(No. 5391B) 3E
Werbung
