Werbung
SMONTAGGIO MOTORE
ENGINE DISASSEMBLY
DÉCOMPOSITION MOTEUR
MOTORAUSBAU
DESMONTAJE MOTOR
Clutch disassembly (SMR 450-R; pages F.20-F.21)
Using a 4 mm allen wrench, remove the six screws (2) with relevant spring washers and the holder (3) assy. with bearing.
Remove the clutch control rod (4). Insert the tool (5), code no. 8000 A8191, in the seat on the hub (6). Using a 27 mm wrench and
the tool (7), code no. 8000 A8190, remove the hub (6). Remove the thrust bearing (8), the spring pushing disc (9) and the spring
(10).
To avoid the pin (18A)-ball (18) assembly coming out of place, fasten clutch drum (16) on the clutch hub (17) using a
screw (A) M6x15.
Remove the pressure plate (11) complete with shim, the clutch spring (12), the washer (13), the clutch drum stop hub (14).
Remove the discs (15) and the clutch drum assy. (B). Remove the clutch control rod (20). Remove the shim (21), the washer (22),
the clutch disc housing (23), the bushing (24) and the washer (25).
F.20
Part. N. 8000 A7735 (07-2006)
Quicklinks ausblenden:
Werbung
Kapitel
Fehlerbehebung
