Drv.memaddr - Kollmorgen AKD-N-DB Benutzerhandbuch

AKD Benutzerhandbuch | 25.14.48 DRV.MEMADDR

25.14.48 DRV.MEMADDR

General Information
Type
Description
Units
Range
Default Value U8
Data Type
Start Version M_01-00-00-000
Variants Supported
Variant
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Description
DRV.MEMADDR sets the address that is used by DRV.MEMDATA. The input can be either an inter-
nal parameter of the drive or any direct address from the DSP address space (SDRAM, internal RAM,
or asynchronous memory). The input value can be either decimal or hexadecimal with 0x prefix.
Type extension can be one of the following:
U8,S8,U16,S16,U32,S32,U64,S64.
Examples
Setting to an internal parameter:
-->DRV.MEMADDR CCommandHandler.Debug1
Setting to an internal address:
-->DRV.MEMADDR 0xffabcde.u16
Related Topics
DRV.MEMDATA (➜ S. 688)
R/W Parameter
Sets the read and write address.
N/A
N/A
N/A
Supported
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
KOLLMORGEN | Dezember 2014 687