BRAND Liquid Handling Station Gebrauchsanleitung Seite 391

In the following example, you can find this information in the context menu:
20 μl -> A3: With the selected pipetting step, 20 µl were transferred from the source well to destination well
A3. Clicking on Delete removes the pipetting step.
Deleting individual pipetting steps
If multiple pipetting steps were executed to fill a destination well, these steps are listed in the context menu
so that each pipetting step can be deleted separately.
If individual pipetting steps should be deleted, only one destination well may be selected.
a. Right-click on the relevant destination well.
b. Select the pipetting step you wish to undo.
c. Select Delete.
In Multidispense mode, the currently active transfer must first be finished before individual pipetting steps
can be deleted. You can do this by right-clicking to open the context menu and selecting Finish Transfer.
Deleting all pipetting steps
If one well is selected:
a. Select the desired destination well.
b. Press the Del key.
Alternatively
Right-click to open the context menu and select All > Delete (this option is only available if multiple pipetting
steps were executed in this well).
When deleting all pipetting steps, it is possible to select multiple destination wells at once.
Liquid Handling Station
NOTICE
Software
Operating manual English
391