BRAND Liquid Handling Station Gebrauchsanleitung Seite 386

Software
You can find out about how to proceed with a serial dilution under Multidispense [fill up].
For information on errors and how to correct them, see Error messages, p. 392.
7.9.1.2.6
For dispensing multiple varying volumes in a defined sequence. A sequence can either be entered manually
or imported from a spreadsheet program.
a. Select the Aspirate Volume:
Auto refill (preset):
The required volume is aspirated. If the volume to be dispensed is greater than the nominal volume the
aspiration process is repeated automatically.
oder
You specify a volume in the volume range of the Liquid End.
b. Enter a sequence of volumes (in µl) to be transferred consecutively:
Manual entry:
Click in the blank Transfer Volume list and enter the desired volumes one after the other.
Import from a spreadsheet program:
386
Operating manual English
Multidispense [listed]
Liquid Handling Station