Use Imported Labware; Advanced Method Settings; Creating A Distribution Pattern; Special Functions - BRAND Liquid Handling Station Gebrauchsanleitung

Software

7.8.3 Use imported labware

To equip the Work Table with the labware you imported, proceed as follows:
a. Open Method > Work Table.
b. Under Settings: Add Labware, click on the desired category.
ð The following image will appear:
c. Select Custom plates and select labware.
Alternatively:
Under Work Table > Settings: search the custom labware.

7.9 Advanced Method Settings

7.9.1 Creating a distribution pattern

7.9.1.1 Special functions

The special functions (and their combination) contribute to the easier and more effective creation of the dis-
tribution pattern in Pipette mode.
To get to the special functions in the Transfer Liquid dialog window, proceed as follows:
a. Select the source well(s) from which liquid is to be aspirated.
b. Right-click to open the corresponding context menu.
c. Select a special function.
d. Optional: Reopen the context menu and select a second special function to be applied in combination
with the first one selected.
NOTICE
Special functions are only available in Pipette mode and not in Multidispense mode!
376
Operating manual English Liquid Handling Station