BRAND Liquid Handling Station Gebrauchsanleitung Seite 379

7.9.1.1.9
If you select multiple continuous or multiple individual source wells, these can be dispensed into the desti-
nation in defined partial steps. For example, if "Take 2 wells" is selected, two wells can always be dispensed
simultaneously into the destination.
Example:
7.9.1.1.10
In Pipette Listed mode, the additional special function Cherry Picking is available. The Cherry Picking function
can be enabled after inserting the pipetting scheme in tabular form and selecting the source.
In combination with other special functions, the sources distributed in an unordered way on the source can
be dispensed in an ordered way and also, as the case may be, multiple times (see Bundle, Split, and Retain).
7.9.1.2 Different pipetting modes
7.9.1.2.1
For the standard aspiration and dispensing of a liquid, i.e. this mode corresponds to the procedure used for
manual pipetting.
a. Enter the Pipetting Volume.
b. Select the source well(s) from which liquid is to be aspirated.
c. If necessary, select a special function.
d. Select one or more destination wells into which the liquid is to be dispensed.
You can change the pipetting volume between the individual pipetting steps.
Liquid Handling Station
Split
Cherry Picking
Pipette [standard]
NOTICE
Software
Operating manual English
379