BRAND Liquid Handling Station Gebrauchsanleitung Seite 332

Software
Select Device
Select the device standing at the corresponding position. Under Name, you can see the device name you as-
signed in the Device Manager. Under Range, you can see the operating range of the Teleshake95, e.g. 100
rpm... 1900 rpm.
Shake ON/OFF
Activate or deactivate the Teleshake95 for the current method. The Teleshake95 shakes the labware over a
set time and begins when the command is reached in the method sequence.
Frequency
Set the frequency at which the Teleshake95 should shake the samples.
Define Shake Duration
Set the duration for which the Teleshake95 should shake the samples.
Info
The entry under Description appears in the Command List.
The field Comment is used to describe the Command in greater detail.
Sequence messages during the execution of
7.5.7.2.3
the method
For explanations of the messages appearing during the sequence, see Sequence Messages > "Waiting for
Shaker".
7.5.7.3 Heat Command
This Command is used to activate and configure the Teleshake95 using the software.
332
Operating manual English Liquid Handling Station