Inhaltsverzeichnis
Werbung
Extending the Safety Program – Application Examples
5.1.3 Preset block creation
The following describes how to create a new preset block. Alternatively, a ready-made
function block can be used (see chapter: 5.1.4 "Use preset block from the library").
In order to create the preset block, first of all a new safe function block must be
created with the name TR_Preset-TR-Profile-Safety. To do this, go to
Project
EPN_PROFIsafe -> PLC_1 [CPU 1511F-1 PN] -> Program blocks ->
Add new block by double-clicking with the left mouse button.
In the opened window select the function block on the left-hand side. For Name:
TR_Preset-TR-Profile-Safety is entered in the example project, for
Fail-safe: the Create
Language: FBD must be set. In the field: Number 181 is entered manually in
the example project. As the block will be edited immediately after creation, the
Add new and open checkbox below Additional information must be
ticked. The function block is created and opened in the program editor by
pressing the OK button.
TR-Electronic GmbH 2019, All Rights Reserved
Page 128 of 144
tree and in the directory tree select the entry CD_582_-
F-block checkbox must be ticked and for
TR - ECE - TI - DGB - 0340 - 01
Printed in the Federal Republic of Germany
12/17/2020
Werbung
Inhaltsverzeichnis
