Philips PS6000 Benutzerhandbuch Seite 14

PS-Micro control desk LBB 6105/00
3.2 Mobile/Channel Information
By simply pressing the channel-button (B1- B5) corresponding to a particular mobile the display
will provide information about the status of a PS-mobile.The status of the channel LEDs in
'STAND-BY' mode are given in table 3.1.
While in the STAND-BY
mode, scroll through the
channels using the 'main-
button' <BM> and press the
relevant channel-button (B1 -
B5) according to the PS-
mobile you require
information on
Date and Time
Shows the current date and
time. The format for the
Data and Time can be
changed according to your
preference (See 11. USER
MENU).
Channel Information
display
Once in the channel-inform-
ation display, the display will
show the information and
status of the selected PS-
mobile. Its address, status, last
reported location (if
available) date and time and
the operational settings for
the selected PS-mobile.
Mobile address
The MOBILE address is a 4-
digit number programmed in
the PS-mobile.
Mobile status
Depending on the status of
the PS-mobile, its status can
be reported as: 'PRESENT',
'WAIT FOR SCAN',
'ABSENT', 'ALARM', 'GSTEST'
or 'LOW BATTERY'.
STANDBY mode
MOB 01 MOB 02
G G
G
CHANNEL INFORMATION display
MOBILE-
Address Mobile status
0001 PRESENT
LOCATION 003
0001 PRESENT
LOCATION 003
Table 3.2 gives an overview of the Mobile status.
location
If applicable to your system, the current reported location of
the PS-mobile during its last 'check-in' call. This location is
updated during a 'check-in' call or in some cases when the PS-
mobile passes a location transmitter. See 1.6.1 Location
detection.
10
Date and Time
28-02-00 16:30
MOB 03 MOB 04
G G
G
Location
USER options
scan on guard on RETURN
G G
Mobile operational settings
scan on guardoff RETURN
G G
User Manual
MOB 05
G
G
G