Storing Your Weight In The Memory - Philips HF8005/00 Bedienungsanleitung

EnglisH
8
 Step off the scales.
The appliance switches off automatically.
,
Note: Weighing should take place under identical conditions to ensure valid comparisons. The ideal time
to weigh is in the morning before breakfast

Storing your weight in the memory

The appliance can store up to 36 weight measurements for up to five users. This makes it easier to
track changes in your weight over time.
1 Repeatedly press the USER button until the display shows the right user number (Fig. 1).
 Step onto the scales.
Your weight is displayed after a few seconds (Fig. ).
,
Your weight is automatically stored under the selected user number.
,
Alternative storing method
You can also store your weight after weighing without first selecting a user number in the following
way:
1 Step onto the scales.
The appliance switches on automatically.
,
Your weight is displayed after a few seconds.
,
 Step off the scales.
3 Repeatedly press the USER button until the display shows the right user number (Fig. 1).
4 Press the SET button to store your weight under the selected user number (Fig. 1).
The appliance switches off automatically.
,
Retrieving measured weights from the memory
1 Repeatedly press the USER button until the display shows the right user number (Fig. 1).
 Press the % and ^ buttons to browse through your weight history. (Fig. 11)
The first line of the display alternately shows the measurement number and the
,
measurement date. The second line of the display shows the weight measured on this
date. (Fig. 3)
Deleting a single weight from your weight history
1 Repeatedly press the USER button until the display shows the right user number (Fig. 1).
 Press the % and ^ buttons to browse through your weight history. (Fig. 11)
Stop browsing when the display shows the weight you want to delete.
3 Press the SET button for  seconds until the dustbin symbol appears on the display (Fig. 4).
4 Press the % or ^button until the dustbin symbol starts flashing.
5 Press the SET button again to delete the weight (Fig. 1).
Note: If you do not want to delete the weight, press the % or ^ button.
Deleting all data of a user
1 Repeatedly press the USER button until the display shows the right user number (Fig. 1).
 Press the USER button for  seconds until the display shows the dustbin symbol (Fig. 5).
3 Press the SET button to delete all data under the selected user number (Fig. 1).
All manuals and user guides at all-guides.com