Bosch Rexroth PST 6 Serie Betriebsanleitung Seite 239

1070087088 / 08 | PST 6xxEx
General information on damage to property and products
Overheating or condensation due to insufficient cooling
Possibility of temporary interruption of the welding process, a re­
duced useful life of the product, destruction of the device, damage
to the electrical equipment, unexpected plant reactions!
" Make sure that the conditions for sufficient cooling set forth in the
technical data are met.
" Make sure that air-cooled devices are equipped with forced coo­
ling. Cooling by means of convection is not sufficient!
Make sure that no condensation forms on water-conducting
"
components.
If that is not possible, a sufficient discharge and protection against
condensation must be provided.
Use air conditioning systems, if required.
Bosch Rexroth AG
NOTICE
239 / 416