Dynamo And Regulator - Kubota D650-B Handbuch

- - - - - - - - - - - - - - - -
2. DYNAMO AND REGULATOR
CHECKS
o
Checking battery charging current
1) After starting the engine. disconnect the + lead of the
battery and connect an amperemeter.
2) Measure charging current with full electric load (with
lights, etc).
(Notes on checking)
• Connect the amperemeter only after starting the engine.
• In the event of a lower electric load or fully charged
battery. the stipulated value may not be given.
(1) Battery + lead
C022F080
8
Checking AC dynamo's no-load voltage
1) Disconnect lead wire from the dynamo.
2) Start the engine and measure the voltage generated by the
single dynamo.
Reference value
AC 20V or more with the dynamo turning at 5200rpm.
C022F028
214