Kubota D650-B Handbuch Seite 124

GEAR CASE, TIMING GEAR.
CAMSHAFT, OIL PUMP
o
Detaching Governor Spring
1) Detach the governor springs 1 and 2 from governor fork
lever 2.
(Note for reassembling)
• Fix the governor spring to the speed control lever, and
pull the spring or wire through the window of the in ­
jection pump, and spring will be able to be hooked on the
governor fork with ease.
• Bend the end of the governor spring to prevent it from
falling off.
[Al How to remove governor spring
(1) Detach governor spring on the side of fork lever
(21 Gear case
(3) Fork lever 2
f)
Removing Speed Control Plate
1) Remove the speed control plate and governor spring.
(Note for reassembling)
• Be careful not to drop the governor spring in the gear
case.
128