Required Delivery Volume - Bosch Rexroth LU 2/P Montageanleitung

6.2 Required delivery volume


Please note:



Table 5: The delivery volume is determined by chain type and chain length
Transport chain
Duplex chain
Flat top chain
Accumulation roller chain
Vplus chain
The indicated delivery quantities apply per meter of transport chain (not length
of the section!) over a period of 2,000 operating hours.
The indicated delivery quantities are for orientation purposes only. The actual
required delivery volume depends on the operating conditions, the conveyor
speed and the loads.
The delivery volume should be dispensed continuously in as small quantities as
possible over this period of time while the transport chain is still running.
Check the lubrication condition of the transport chains at regular intervals and
adjust the delivery volume accordingly if necessary.
Required delivery volume [cm³]
per meter of the transport chain
over a period of 2,000 operating hours
1.5
5.62
2.25
2.25
3 842 557 976/2020-08, MIT: LU 2/P-24V-3L, Bosch Rexroth AG
Function 19/42