Required Delivery Volume; Flat Top Chain, Not Nickel-Plated (Before 12/2014) / Manual Lubrication: Required Delivery Volume For 2 - 3 G Oil/M Chain Every 1000 H; Flat Top Chain, Nickel-Plated (From 01/2015): Required Delivery Volume For 2 - 3 G Oil/M Chain Every 2000 H - Bosch Rexroth LU 2 Montageanleitung

22/54 Function
Please note:
Please note:
The lubrication quantities
given are guide values.
Depending on
• Application
(module)
• Ambient conditions
(temperature, dirt)
• Strain
(speed, load)
values may deviate.
Please observe the
assembly instructions
for the module to be
lubricated.
x [m]: Length of section
(not length of
chains!)
y [h]: Time interval
between two
delivery processes
1
):
Delivery volume
each impulse:
3
0.2 cm

2 - 3 g oil/m chain every
2000 h means that the
time interval between
2 delivery processes
doubles
(= 0.5 delivery
processes).

2 - 3 g oil/m chain every
500 h means that the
time interval between
2 delivery processes
halves
(= 2 delivery processes).
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2018-12

6.3 Required delivery volume

Information "x [m]" shows the length of the section (order information l), not the
length of the chains!)
6.3.1 Flat top chain, not nickel-plated (before 12/2014) / manual lubrication:
Required delivery volume for 2 - 3 g oil/m chain every 1000 h
y [h/Inpuls]
10
9
8
7
6
5
4
3
1
)
2
1
0
1 2 3 4 5
Fig. 4: Flat top chain: Required delivery volume for 2 - 3 g oil/m chain every 1000 h
6.3.2 Flat top chain, nickel-plated (from 01/2015):
Required delivery volume for 2 - 3 g oil/m chain every 2000 h
y [h/Inpuls]
20
15
10
5 1
)
0
1 2 3 4 5
Fig. 5: Flat top chain: Required delivery volume for 2 - 3 g oil/m chain every 2000 h
6 7 8 9 10 11 12
6 7 8 9 10 11 12
13 14 15 16 17 18 19
13 14 15 16 17 18 19
20
x [m]
358814-FPK_1000h
20
x [m]
358814-FPK_2000h