Install Support Bracket And Connector Set In The Holder - Bosch Rexroth LU 2 Montageanleitung

30/54 Assembly
1. Pre-assemble the
support bracket (E) and
the connection set (F).
2.
Set the support bracket
and the connection in
the holder.
3. Connect hoses to
the lubrication unit
according to your
application (see also
page 33 to 37).
Seal the screwed
connections with the
sealing agent (F )
2
enclosed.
1
) Enclosed sealing agent for
screwed connections
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2018-12
8.5.2

Install support bracket and connector set in the holder

F
2
Fig. 9: Install support bracket and connector set in the holder
SW17
SW17
F
1
)
E
1
SW17
358 814-20