About This Documentation; Required And Supplementary Documentation; Presentation Of Information; Safety Instructions - Bosch Rexroth LU 2/P Montageanleitung

6/42

About this documentation

Bosch Rexroth AG, MIT: LU 2/P-24V-3L, 3 842 557 976/2020-08

1.2 Required and supplementary documentation


Only commission the product if he documentation marked with the book symbol
is available and you have understood and followed the instructions in it.
Table 1: Required and supplementary documentation
Title
Employee safety training
DropsA SMART3 PUMP
Klüber Lubrication
STRUCTOVIS GHD
1
MTpro )
1
) Download at: www.boschrexroth.com/mtpro

1.3 Presentation of information

Standardized safety instructions, symbols, terms and abbreviations are used so
that you can use this documentation to work quickly and safely with your product.
These are explained in the following sections to help you understand them better.
1.3.1

Safety instructions

This document contains safety instructions in section 2.6 "Product-specifi c safety
instructions" and section 3 "General notes on property and product damage", as well
as before any sequence of actions or any required action which involves a risk of
personal injury or property damage. Be sure to observe all safety precautions.
Likewise, the safety instructions contained in the documents from Table 1 on
page 6 must be followed.
Safety instructions are set out as follows:
Type and source of danger!
Consequences of non-compliance

Measures to prevent danger

...
• Safety sign: points out the danger
• Signal word: indicates the severity of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes the consequences of non-compliance
• Prevention: states how the danger can be avoided
Document number
3 842 527 147
Manufacturer documentation
Manufacturer documentation
3 842 539 057
SIGNAL WORD
Document type
Operating and
maintenance manual
Safety data sheet
With list of spare parts