Specifications; General Specifications - Sony MJ700 Bedienungsanleitung

5. Specifications

5-1. General specifications

Number of divisions (number of interpolations)
See "3-3-1. Setting the number of divisions."
Minimum phase difference
See "3-3-3. Output phase difference."
Output signal
See Fig. 3-1.
Reference point signals
Reference point signals are output during one cycle of the A
phase signal (Z mode) or when both the A and B phase signals
are high level (1/4 mode), depending on the setting.
Output circuit
Voltage-differential line driver (MC34C87)
PCA, PCB, PCZ, ALARM
*PCA, *PCB, *PCZ, *ALARM
Use the MC34C86 or an equivalent product for the receiver
circuit.
Maximum response frequency
See "3-3-1. Setting the number of divisions."
External contact-type reference point gate and
cable length
SET-P15-1 can be used.
Max.: 31.5 m
Alarm signal
See "3-7. Alarm signal."
Power supply
Power consumption
Operating temperature range
Storage temperature range
Mass
Accessories
Encoder signal input connector ....................... 1 set
External contact-type reference
point gate input connector ............................... 1 set
Output connector ............................................. 1 set
Connector cap .................................................. 1
Instruction manual ........................................... 1
Mounting screws .............................................. 2
Ferrite core ....................................................... 1
4.5 to 8 V DC
4 W
0 to +45dC
_20 to +60dC
350 g
(E) 39