Operation; Names Of Each Part - Sony MJ700 Bedienungsanleitung

3. Operation

3-1. Names of each part

5 Output 5 5 5 5
connector
1 MODE switches
Used to set the reference point, A/B phase direction, and
resolution.
4 (E)
MODE
10
9
8
7 1 1 1 MODE switches
1 1
6
5
4
3
2
1
ON OFF
2 ABS lamp 2 2 2 2
ABS
OFF OFF
3 3 3 POS. lamp 3 3
ON OFF
OFF ON
ON ON
4 ALARM lamp 4 4 4 4
LEVEL
ALM
SPEED
MJ700
8 8 8 Option switches 8 8
7 7 Encoder signal input connector 7
7 7
6 6 6 6 6 External contact-type reference
point gate input connector
2 ABS lamp
Lights when the reference point input signal is active.
3 POS. lamp
Used while setting the reference point.
4 ALARM lamp
Lights when an alarm is generated.
LEVEL indicates a level alarm for the input signal, and
SPEED indicates an excess speed alarm.
5 Output connector
This connector is used to input power and to output each
signal.
6 External contact-type reference point gate input
connector
This connector is used for input of external contact-type
reference point gate signals.
7 Encoder signal input connector
This connector is used for encoder signal input.
8 Option switches
Used to set the alarm, reference point mode, and other
supplemental functions.