Attachment Possibilities In The Back; Retainer Frame In The Back; Double-Acting Hydraulic Connections Aux (Front) - Kärcher MIC D Bedienungsanleitung

6.6

Attachment possibilities in the back

6.6.1

Retainer frame in the back

6.7

Double-acting hydraulic connections AUX (front)

6.7.1 Double-acting control hydraulics connection AUX - Red
88
1 Retainer frame in the back
2 Trailer hitch (optional)
In the retainer frames, various attachments or counterbal-
ance weights can directly be attached to the vehicle.
The trailing load and drawbar load of the optionally in-
stalled hitch are listed in Chapter "Technical data".
1 Double-acting control hydraulics connection AUX - red
2 Double-acting control hydraulics connection AUX -
Blue (optional)
3 Double-acting control hydraulics connection AUX -
Green (optional)
The control of the hydraulic connections takes place via

the joystick.
6.7.1.1 Float position
To activate/deactivate the floating position of AUX red

and blue, operate the relevant button on the joystick.
Note
To operate the AUX connections red and blue, deacti-
vate the respective floating position.
MDC variant (mechanically controlled drive)
The control of the hydraulic connections takes place via

the control lever for AUX - red/blue
AUX Red - Switch off switch 1 (position 0).

6.7.1.2 Float position
To activate the floating position, push the control lever

all the way to the front.
To deactivate it, move the control lever out of the catch

position.
31
-
EN