Endress+Hauser iTEMP TMT162 Kurzanleitung Seite 31

iTEMP TMT162
Symbol Meaning
Reference to documentation
Reference to graphic
Result of a sequence of actions
1.2.4 Tool symbols
Symbol Meaning
Flat-blade screwdriver
A0011220
Phillips screwdriver
A0011219
Allen key
A0011221
Open-ended wrench
A0011222
Torx screwdriver
A0013442
1.3 Registered trademarks
FOUNDATION™ Fieldbus
Registered trademark of the Fieldbus Foundation, Austin, Texas, USA
2 Basic safety instructions
2.1 Requirements for the personnel
The personnel must fulfill the following requirements for its tasks:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task
‣
Are authorized by the plant owner/operator
‣
Are familiar with federal/national regulations
‣
Before beginning work, the specialist staff must have read and understood the instructions
in the Operating Instructions and supplementary documentation as well as in the
certificates (depending on the application)
Endress+Hauser
Symbol Meaning
Reference to page
Series of steps
, ,
...
Visual inspection
Basic safety instructions
31