Yamaha WaveRunner FX160 Wartungshandbuch Seite 628

– +
ELEC
REMOTE CONTROL SYSTEM
Number of
beeps
1 beep
2 beeps
3 beeps
• Press the unlock button for more than 4
seconds to select the low-rpm mode.
• Check that the beeper sounds three
times and the "L-MODE" indicator light
comes on.
NOTE:
• If the start switch or the remote control
transmitter is not operated for more than
25 seconds, the multifunction meter dis-
play and the "L-MODE" indicator light will
go off. To change the modes again, press
the lock button for a short time, and then
start the procedures from the lock mode.
• While the engine is running, input from the
remote control transmitter is not received.
7-54
Yamaha
Engine
Security
startability
System mode
Lock Unable
Unlock
(normal mode)
Unlock
(low-rpm
mode)
E
Able
Able