Husqvarna TE 570 Serie Werkstatt-Handbuch Seite 60

FRAME, WHEELS AND SUSPENSION
Trouble
Difficult to turn handlebars
Handlebar vibrates
Suspension too hard
Suspension too soft
Wheel (front and rear)
vibrates
Rear suspension noisy
Poor (front and rear)
braking
C.8
TROUBLES AND REMEDIES
Cause
1. Low tyre pressure
2. Steering head bearings' adjustment ring or steering stem nut
too tight
3. Bent steering head pillar
4. Stearing head bearings worn or seized
1. Front fork legs bent
2. Front wheel spindle bent
3. Frame bent
4. Front wheel rim buckled
5. Front wheel bearings worn
1. Too much oil in front fork stanchions
2. Front fork stanchion oil of too high a viscosity
3. Inflating pressure too high
4. Rear shock absorber incorrectly set
1. Insufficient oil in front fork stanchions
2. Front fork stanchion oil of too low a viscosity
3. Weak front fork spring
4. Weak rear shock absorber spring
5. Rear shock absorber badly adjusted
1. Wheel rim buckled
2. Wheel hub bearings worn
3. Wheel spokes loose
4. Wheel spindle nut loose
5. Rear swinging arm bearings worn
6. Chain tensioner incorrectly set
7. Wheel not balanced correctly
1. Link rod bearings or spacers worn
2. Shock absorber ball joints worn
3. Shock absorber faulty
1. Air in the brake sustem
2. Insufficient fluid in reservoir
3. Pads and/or disc worn
4. Disc damaged
5. Brake pedal incorrectly adjusted
6. Water inside the braking system.
Remedy
Inflate
Adjust
Replace
Replace
Replace
Replace
Replace
Replace
Replace
Drain excess
Replace
Deflate
Adjust
Top up
Replace
Replace
Replace
Adjust
Replace
Replace
Tighten
Tighten
Replace
Adjust
Balance
Replace
Replace
Replace
Bleed
Top up
Replace
Replace
Adjust
Replace the fluid
N° 8000A2943 (09-03)