SICK S3000 Standard Bedienungsanleitung Seite 76

76
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Register name Block word
4
Output data 5
Field bits Field name
0 ... 15 Speed
0 State of OSSDs 0: Deactivated (red)
1 State of
warning output
or aux 3
2 ... 3 State of reset
required output
or aux 2
4 ... 5 State of
error/weak
output or aux 1
6 ... 7 n/u
8 Field A
9 Field B
10 Field C
11 Field D
12 Reset required
field A
13 Reset required
field B
14 Reset required
field C
Telegram Listing Standard
S3000/S300
Field description
–2000 ... 2000 [cm/s]
(two's-complement
representation)
0x0000: Speed is not
evaluated.
In compatibility mode:
0x7FFF: Speed is not
evaluated.
Other: n/u
(Consider speed valid flag!)
1: Activated (green)
0: Deactivated (red)
1: Activated (green)
0: Deactivated (off)
1: Toggling slowly (1 Hz)
2: Toggling fast (4 Hz
3: Activated (on)
0: Deactivated (off), not
configured or
contamination error.
1: Toggling slowly (1 Hz),
contamination warning.
2: Toggling fast (4 Hz),
lockout.
3: Activated (on), configured
and no lockout or
contamination error.
n/u
Intrusion detected by field
evaluation A.
0: Intrusion detected.
1: No intrusion detected.
Intrusion detected by field
evaluation B.
0: Intrusion detected.
1: No intrusion detected.
Intrusion detected by field
evaluation C.
0: Intrusion detected.
1: No intrusion detected.
Intrusion detected by field
evaluation D.
0: Intrusion detected.
1: No intrusion detected.
Reset required by field
evaluation A.
0: No reset required.
1: Reset required.
Reset required by field
evaluation B.
0: No reset required.
1: Reset required.
Reset required by field
evaluation C.
0: No reset required.
1: Reset required.
8015792/YY12/2015-02-12
Subject to change without notice