Herunterladen Diese Seite drucken

Sony HKDW-104 Bedienungs- Und Installationsanleitung Seite 9

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
English
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
For the customers in Europe
This product with the CE marking complies with the EMC
Directive issued by the Commission of the European
Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environment: E4 (controlled EMC
environment, ex. TV studio).
The manufacturer of this product is Sony Corporation, 1-
7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan.
The Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany.
This apparatus shall not be used in the residential area.
For the customers in Europe, Australia and New
Zealand
WARNING
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the
user may be required to take adequate measures.
Precautions
If this unit is installed incorrectly, personal injury or
damage to peripheral items may occur due to fire, shock,
or other accidental circumstances. To avoid such risks,
installation should be performed by trained service
technicians.
To the technician installing the unit
Please refer to the INSTALLATION MANUAL supplied
with this unit for installation instructions.
Note
Be sure to power off the HDW-1800/D1800 before
installing this board.
Overview
The HKDW-104 Pull-down/720P Board is an option board
for installation in the Sony HDW-1800/D1800 HD Digital
Videocassette Recorder.
The principal features of this board, upon installation in the
HDW-1800/D1800 are as follows.
• With 2-3 pulldown, a 1080/23.98PsF mode output signal
can be converted to a 59.94i signal, and a 1080/24PsF
mode output signal can be converted to a 60i signal.
• The REF. VIDEO INPUT 2 (reference video signal
input 2) connector can be used, and operations can be
carried out in dual reference mode.
• A 1080/59.94i output signal can be converted to a 720/
59.94P signal, and a 1080/50i output signal can be
converted to a 720/50P signal.
• Operation in slow process mode is possible.
About Operating Instructions
Refer to the version below or a later version of the HDW-
1800/D1800 Operation Manual (in English).
If the version of your manual is earlier than this, please
contact a Sony service representative.
HDW-1800/D1800: 1st Edition (Revised 1)
GB
9
Overview

Werbung

loading