Werbung
Verfügbare Sprachen
Verfügbare Sprachen
a Type of time data
Display
Meaning
TCR
LTC reader timecode
UBR
LTC reader user bits
a)
Timecode generator timecode
TCG
a)
Timecode generator user bits
UBG
a)
IN point
IN
a)
OUT point
OUT
a)
Audio IN point
AI
a)
Audio OUT point
AO
a)
Duration between any two of the four edit
DUR
points (IN, OUT, audio IN, audio OUT)
a) Time data and user bits are values before pulldown conversion.
b Timecode reader drop-frame mark (for 23.98PD1,
23.98PD2 mode only)
".": Indicates drop-frame mode
":": Indicates non-drop-frame mode
c Playback status
"*": Indicates that timecode progression is precise and that
pulldown playback is being performed correctly
"?": Indicates that timecode progression is imprecise, or
that pulldown playback is abnormal.
d Type of timecode
"30F": Post-pulldown timecode
"24F": Pre-pulldown timecode
e VTR control mode (Recorder/player selection)
The indication changes as follows, according to the VTR
control mode (the setting of F6 (R/P SEL) in function
menu page P06: EDIT).
P: Two-unit editing is currently being carried out and the
VTR (player) connected by a 9-pin remote control
cable is being operated from the lower control panel
(P-CTRL).
R: Two-unit editing is currently being carried out and the
HDW-1800/D1800 (recorder) is being operated from
the lower control panel (R-CTRL).
No indication: The HDW-1800/D1800 unit (recorder) is
being operated from the lower control panel as a
standalone unit. Alternatively, multiple VTR units
connected by 9-pin remote control cables are being
operated in synchronization (PARARUN).
Note
No character is displayed for both the PARARUN mode
and the standalone operation mode.
f Stop freeze mode
#: This appears when tapes stop with the STOP FREEZE
function enabled by the setting of setup menu item
906.
No indication: The STOP FREEZE function is not
enabled by the setting of setup menu item 906.
g Operation mode
This field is divided into three blocks, A, B and C.
• Block A displays the operation mode.
• Block B displays the servo lock status or tape speed.
• Block C displays a x mark to indicate an edit section
during automatic editing.
A
Display
Block A
Block B
TAPE UNTHREAD
STANDBY OFF
T.RELEASE
STOP
F.FWD
REW
PREROLL
PLAY
PLAY
LOCK
PLAY
Variation from
normal speed
(%)
REC
REC
LOCK
EDIT
EDIT
LOCK
JOG
STILL
JOG
FWD
JOG
REV
SHUTTLE
(Speed)
VAR
(Speed)
AUTO EDIT
PREVIEW
REVIEW
DMC
a)
(Speed)
D-PREV
a)
(Speed)
D-EDIT
a)
(Speed)
B
C
Operation mode
Cassette is not loaded.
Standby off mode
Tape tension release mode
Stop mode
Fast forward mode
Rewind mode
Preroll mode
Playback mode (servo
unlocked)
Playback mode (servo locked)
Capstan override mode
Record mode (servo unocked)
Record mode (servo locked)
Edit mode (servo unlocked)
Edit mode (servo locked)
Still playback in jog mode
Jog mode in forward direction
Jog mode in reverse direction
Shuttle mode
Variable speed mode
Automatic editing mode
Preview mode
Review mode
DMC playback mode
DMC editing preview mode
DMC editing mode
Settings for Each Output Mode
11
Werbung
